Concord Magazine Carrier

(1 customer review)

$40.00

An IWB magazine carrier, excellent for appendix carry, ride height adjustable, mag seat depth adjustable, ambidextrous.

Black Coyote Brown +$3.00 Gunmetal Gray +$3.00 OD Green +$3.00 Blood Red (dark) +$5.00 Blue +$5.00 EMT Red (bright) +$5.00 Orange +$5.00 Purple +$5.00 Zombie green +$5.00 Black Carbon Fiber +$10.00 Blue Carbon Fiber +$10.00 EMT Red Carbon Fiber +$10.00
(1) PTD Soft Loop (1) DCC Clip 1.5" Canted +$8.00 (1) DCC Clip 1.75" Canted +$8.00

Mag carrier is ambidextrous, selecting right or left below will tell us on which side to install the hardware

By checking this box I acknowledge that this is a handcrafted American product made to order with a lead time.

Description

UPDATED Sept. 2023! The Concord is now made with more exacting tolerances and is AMBIDEXTROUS so that it can be set up for either right or left hand use. 

When you set a magazine high enough to grab it easily, it often wants to tip out, especially when carried up front to balance out your AIWB holster.  This one solves that problem and provides a lot of flexibility in terms of retention, cant, belt ride height, and mag seat depth.

The Concord is made from the highest quality materials and is hand-crafted here in the USA.

Maximum Adjustability

Adjustable Retention. Your Concord mag carrier is made specific to your magazine, but in order to maximize your ability to use it with magazines of other firearms you own, the retention is adjustable with a simple retention screw.

Adjustable Cant. Regardless if you choose the PTD Soft Loop or DCC Clip both are able to be adjusted for cant angle, so you can adjust your magazine pouch to the angle you feel maximizes concealment and efficient access. The DCC clips are available for both 1.5″ and 1.75″ belt widths.

Adjustable Magazine Depth. How “deeply” the magazine sits inside the Concord Mag Carrier is actually adjustable with a screw and rubber washer “stop” that goes through the inside of the mag carrier itself. Adjust it higher or lower on the mag carrier to impact the magazine depth.

Adjustable Ride Height. The Concord can sit lower or higher in your pant as needed by adjusting the attachment point of the clip or soft loop to the mag carrier. Several height options are built in.

Belt Attachment Options

With the Concord Mag Carrier, you can choose between either a PTD Soft Loop or a DCC cant-adjustable clip. The Soft Loop can be adjusted for various belt sizes including 1.25″, 1.5″, and 1.75″ belts.

1.5″ and 1.75″ DCC clips are also available as an option.

Selecting Your Firearm – Not Listed?

The Concord IWB Magazine Pouch can easily fit most double-stack 9mm or .40 magazines. During the manufacturing process, we fit the mag carrier to the magazine you indicated when you ordered. Since so many magazines are very similar in size and the Concord IWB Mag Carrier has adjustable retention you have some flexibility in terms of the size of the magazine that can be accommodated.

However, that doesn't mean that the Concord is a one-size-fits-all solution by any means.

If your firearm is not on the list provided then you can do some research and identify what magazine that IS on our list is the same dimensionally or close to the same as your firearm. Alternatively, you can select “Other Double Stack 9mm/.40” and indicate in the order notes what firearm you have and we can try to mold the mag carrier as close as possible to your firearm's magazine.

If you have concerns about fit beyond what has been described above, please email us first.

 

Additional information

Weight 2 oz
Dimensions 11 × 6.5 × 2.3 cm

1 review for Concord Magazine Carrier

  1. Alexis (verified owner)

    I purchased this magazine carrier due to the unbalanced appearance of only carrying my pistol holster. I was having a difficult time visually conealing my pistol with an apparent bulge only coming from one side of my front profile. I read a blog online that suggested for smaller framed people to consider a magazine holster as well so as to even out the distribution. So, I figured what the hay, lets give it a go.

    I am 5′ 7″ and I weigh 160 pounds
    I am a female with a 33″ waist

    I do want to say that I am a beginner and new to this reality of carrying a force multiplier. I am trying to learn and be teachable. Gabe has been INFINITELY patient with me, and has been far more present and available that could ever be expected by any consumer.

    One hurdle I met when receiving this magazine holster was the wiggle room my magazine had in the holster. I assumed the magazine carrier would have the same retention my Sidekick holster gave my pistol. I had to email Gabe for guidance on where I purchased the product wrong, as I was afraid there was too much play in my magazine and it would fall out. He informed me that there was a silver screw that takes an allen wrench to adjust. The allen wrench is included in your purchase. By tightening the screw, an “arm” is pushed out and this tightens the retention on the magazine. This also allows for the user to decide if the magazine should seat low or high, as there is quite a lot of depth to the holster.

    Ultimately this is just an awesome product. Due to my being new and not having tried any other products, I am not qualified to speak on what makes a product “good” versus “poor”, but in my humble opinion from what I have been reading and my constant play with these products; these are QUALITY products. This is a sound device that I will gladly rest my life in, and my safety.
    With the magazine carrier and the Sidekick holster, I am able to conceal this quite well. And, even though the weight is significantly more (I have a double stack 10 round magazine), it is surprisingly far more comfortable to have the weight distributed over more area than one singular location.
    Personally, I am not able to use the wedge, as it gives me an unattractive appearance in my nethers, I can see the functionality of this device. I have purchased it for both products to see what works for me.

    I would also like to say that for my original purchase I was using the supplied plastic holster clips. For my recent purchase of the magazine carrier, I made the investment to the Discrete Carry Concept Clips – WELL WORTH THE MONEY. These are just awesome! They even seem to grab the clothing with the upward facing hook, so if ever there was a need to wear your set up without a belt; this would work flawlessly. The profile is absurdly smaller as well. There is basically no appearance or profile to their presence, which makes your concealed carry all that more concealed.

Add a review

Your email address will not be published. Required fields are marked *

Beretta: 92FS, M9A3, PX4 Storm Carry 9mm, PX4 Storm Compact 9/40, PX4 Storm Compact Carry 9/40, PX4 Storm Full Size 9/40, PX4 Storm Subcompact 9/40
CZ: 75, 75 D PCR Compact, 75 P-01, 75 P-01 Omega, 75 SP-01, P-07, P-09, P-10 C, P-10 F, P-10 F Competition, P-10 S, SP-01
FN Herstal: 509, 509 Compact, 509 LS Edge, 509 Midsize, 509 Tactical
Glock: 17, 19, 19x, 22 (except Gen 5), 23 (except Gen 5), 26, 27 (except Gen 5), 31, 32, 33, 34, 35 (except Gen 5), 43, 43X, 43x MOS, 45, 48, 48 MOS
Heckler & Koch: P30, P30L, P30SK, USP .40, USP .40 Compact, USP 9mm, USP 9mm Compact, USP Tactical 9mm, VP9, VP9 Match, VP9L, VP9SK
IWI: Masada
Polymer 80: 19/17 Length
Shadow Systems: CR920, DR920, DR920L, DR920P, MR920, MR920L, XR920
Sig Sauer: P226, P229, P320 AXG, P320 AXG Pro, P320 Carry, P320 Compact, P320 Full-Size, P320 M17, P320 M18, P320 MAX, P320 Spectre Comp, P320 Tacops Carry, P320 X-Carry, P320 X-Carry Legion, P320 X-Carry Spectre, P320 X-Compact, P320 X-Compact Spectre, P320 X-Full, P320 X-VTAC, P320 X5, P320 X5 Legion, P365, P365 SAS, P365 XMACRO, P365-380, P365X, P365XL, P365XL Spectre, P365XL Spectre Comp
Smith & Wesson: M&P 9/40 M1.0 3.5", M&P 9/40 M1.0 4.25", M&P 9/40 M1.0 5", M&P 9/40 M2.0 3.6", M&P 9/40 M2.0 4.0", M&P 9/40 M2.0 4.25", M&P 9/40 M2.0 4.6", M&P 9/40 M2.0 5.0", Shield 9/40 M1.0, Shield 9/40 M2.0 3.1", Shield 9/40 M2.0 4.0", Shield Plus 30 Super Carry, Shield Plus 4.0"
Springfield Armory: Hellcat
Walther: PDP Compact, PDP Compact 5", PDP F-Series 3.5", PDP F-Series 4", PDP Full Size 4.5", PDP Full Size 4", PDP Full Size 5", PDP Pro SD Compact 4", PDP Pro SD Full Size 4.5", PPQ M1 4", PPQ M1 5", PPQ M2 4", PPQ M2 5", PPS M2, Q4 Steel Frame, Q4 Tac M1, Q4 Tac M2, Q5 Match M1, Q5 Match M2, Q5 Match Steel Frame