Hardware Kit

Description

Did your hardware walk off?  Need to mount different clips to your holster or change the configuration? Just want extra hardware as a “just in case?”

Lucky for you, we've put together two kits to make this an easy task for you–the Standard Hardware Kit which includes the most commonly used components in the assembly of our holsters, and the Deluxe Hardware Kit which includes pretty much…everything!

Both kits include Vibratite VC-3 thread locker to help prevent your screws from coming loose.

Kits DO NOT include the RCS Short Spacer that is REQUIRED to properly mount a holster clip to the face of a wing or claw. You can find the spacer available here: RCS Short Spacer 1/4

Standard Hardware Kit:

• Screws
  • (2) – .250″ Flat Truss
  • (2) – 1.00″ Flat Truss
  • (2) – .750″ Oval Head
  • (2) – .375″ Flat Head
  • (2) – .500″ Flat Head
• Posts
  • (2) – .125″ w/ Clutch
  • (2) – .1875″ w/ Clutch
  • (2) – .375″ Slotted
  • (2) – .500″ Slotted
• Rubber Washers
  • (2) – .065″
  • (2) – .125″
  • (2) – .375″
• Other
  • (2) – Steel Finish Washers (pairs with the oval and flat head screws)
  • (2) – 8-8 Eyelets (for use with ModWings)
  • (1) – 1mL single-use packet of Vibratite VC-3 thread locker

Deluxe Hardware Kit:

• Screws
  • (4) – .250″ Flat Truss
  • (2) – .375″ Flat Truss
  • (2) – .750″ Flat Truss
  • (2) – 1.00″ Flat Truss
  • (2) – .750″ Oval Head
  • (2) – .375″ Flat Head
  • (2) – .500″ Flat Head
• Posts
  • (4) – .125″ w/ Clutch
  • (2) – .1875″ w/ Clutch
  • (2) – .250″ Slotted
  • (2) – .375″ Slotted
  • (2) – .500″ Slotted
• Rubber Washers
  • (4) – .065″
  • (2) – .125″
  • (2) – .187″
  • (2) – .250″
  • (2) – .375″
  • (2) – .480″
• Other
  • (2) – Steel Finish Washers (pairs with the oval and flat head screws)
  • (2) – #8-8 Eyelets (for use with ModWings)
  • (1) – 1mL single-use packet of Vibratite VC-3 thread locker